Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Mehlville
If you live in Mehlville, your chimney probably falls into one of two groups: an original masonry flue in a 1950s-70s brick ranch that hasn’t been touched in decades, or a factory-built fireplace in a newer home that everyone assumes needs nothing. Both need eyes on them. We connect Mehlville homeowners with independent local chimney professionals who sweep, inspect, and repair the whole system from cap to firebox, and we’ve built our work around the houses this town actually has. Call (866) 596-7310. We answer 24/7, with fast dispatch from 7am to 7pm.
Our technicians have up to 12 years of experience, and they know the difference between a chimney that looks fine from the living room and one that’s actually safe to burn in.
Why Mehlville Homeowners Call Hawk Chimney Sweep for Chimney Sweep
Most of Mehlville’s housing was built between roughly 1950 and 1975, and the chimneys show it. When we look at a fireplace in a brick ranch off Lemay Ferry Road or a split-level near Jefferson Barracks, the story is usually the same: the original owner burned wood, the next owner switched to forced-air gas heat, and nobody swept the flue since. That leaves decades-old soot, animal nests, and clay tile that crumbles when you touch it.
The opposite problem shows up in Mehlville’s newer construction. A factory-built fireplace with a manufacturer-specific liner and chase looks young, so it gets skipped year after year while creosote glazes inside. Our inspection-first approach catches both. We look before we brush, and we show you what we find, so you can tell the difference between a chimney that’s simply dirty and one that’s actually failing.
We work across Mehlville, from the neighborhoods near Jefferson Barracks down toward Concord. One call handles the sweep, the inspection, and any repair, which means there’s no handoff between a cleaner and a contractor when something turns up. Our chimney sweep team treats the whole system as one piece of equipment, because that’s how fire and carbon monoxide actually behave.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Fireplace Cleaning in Mehlville
Fireplace Cleaning in Mehlville is usually the first trade to touch a flue in decades, which is why it tends to turn up more than ash. The job means brushing the flue liner, clearing soot and nesting from the firebox and smoke chamber, checking clay-tile joints for cracks, and confirming the damper actually moves. A typical cleaning runs $150 to $290, with the written estimate setting the final price before any work starts.
You need it if the fireplace has sat unused since the house went to forced-air gas heat, if the damper sticks, or if you get smoke spilling into the room on the first fire of the season. A camera inspection and photo report come with the visit, so you see exactly what we saw.
What We Clear From the Firebox and Smoke Chamber
Animal nesting is common in Mehlville fireplaces that haven’t burned in years, along with rust flakes from a damper that’s been frozen shut. Both restrict draft and both are gone by the end of the visit. We check the smoke chamber for first- and second-degree creosote while we’re in there, since that’s where a lot of it hides.
Dampers, Grates, and the Parts That Rust
Freeze-thaw cycles here work on metal as much as masonry. A damper that hasn’t opened since the 1980s often won’t open now without help, and a rusted one can leave the flue open to the house year-round. We check the hardware, not just the flue, so the fireplace is usable when we leave.
Chimney Services in Mehlville
Chimney Services in Mehlville start with a level of inspection, not a brush. The Hawk inspection standard is a top-to-bottom pass of the full flue system: cap, crown, flashing, liner, smoke chamber, damper, and firebox. A Level 1 inspection fits a chimney with no known problems, and a Level 2 adds camera work inside the flue, which is what we recommend whenever a liner is old, a fireplace has changed fuel type, or a home has changed hands.
Inspection typically runs $125 to $275 on its own and is often bundled into a sweep. Repairs are priced separately. If the tiles are cracked or spalling, HeatShield resurfacing rebuilds the flue from the inside, which is a repair most sweep-only companies can’t offer at all.
Level 1 and Level 2 Inspections
Level 1 is the annual check for a chimney in known-good condition: accessible parts, no camera, no surprises expected. Level 2 goes further with video of the flue interior, and it’s the right call for any Mehlville home where the flue history is unknown. Both come with a photo report you keep.

Creosote and Soot Removal
Creosote is what makes a chimney dangerous, and it comes in degrees. First and second degree is brushable. Third-degree creosote is glazed and hard, and it takes more than a brush to remove. We identify which you have during the inspection and tell you plainly what’s needed.

Trusted Brands We Service in Mehlville
Factory-built fireplaces live or die on their parts, and parts are brand-specific. We work with DuraFlex flexible liner systems, HeatShield flue resurfacing, Gelco, Olympia Chimney, Famco, and Copperfield, so when your Mehlville chimney carries one of these, we’re working with components made for it rather than a generic substitute. We don’t stock parts or keep inventory. What we do is identify what’s on your chimney, order the correct manufacturer-specific cap, chase component, or liner, and get it installed without a long wait. On a prefabricated chase, a failed joint at the top can let water in for years before anything shows inside the house. Matching the part to the brand is how that gets fixed properly.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Mehlville Homes
- Never-swept flues in brick ranches. Decades of soot and animal nests sit in fireplaces that look clean from the living room because nobody has burned in them since the house went to gas heat. The flue is still lined with whatever was there in 1965.
- Spalling crowns and washed-out mortar. Mehlville’s freeze-thaw swings crack the crown and open mortar joints on exterior masonry chimneys. It reads as cosmetic until water gets behind the flashing and the liner starts to deteriorate.
- Skipped factory-built fireplaces. A newer chimney gets no attention because it looks new, while third-degree creosote glazes unnoticed and the manufacturer-specific cap and chase go unchecked. A young chimney still needs an annual inspection.
- Cracked clay tile. Original clay liners in 1950s-70s homes develop joint cracks as they age, and those cracks are a path for heat and carbon monoxide into the structure. Camera inspection is the only reliable way to find them.
Pricing for Chimney Sweep in Mehlville, MO
A standard chimney sweep in Mehlville typically runs $150 to $290. A Level 1 or Level 2 inspection is $125 to $275 and is often wrapped into the sweep visit. Creosote and soot removal beyond a routine cleaning, crown and flashing repair, and HeatShield resurfacing are priced separately once we see the flue on camera, because a glazed liner and a lightly sooted one are not the same job. The written estimate sets the final price, and the estimate itself is free.
Most of the cost difference between one Mehlville home and the next comes down to what’s actually in the flue and whether the exterior masonry has taken freeze-thaw damage. Nothing gets recommended without camera evidence you can see for yourself, and we’ll tell you plainly when work can safely wait a season.
We Also Serve Cities Near Mehlville
We connect homeowners with chimney professionals in the towns around Mehlville too, including Lemay, Affton, Concord, and Crestwood. The housing stock is similar across all of them, so the same inspection-first approach applies. If you’re just outside the Mehlville line, call and we’ll confirm coverage before booking anything.
Serving Mehlville, MO – Our Local Coverage Area
We serve Mehlville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Mehlville
Yes. A factory-built fireplace needs an annual inspection no matter how new it is, because the parts that fail first are the ones you can’t see from the living room. Manufacturer-specific caps, chase joints, and liners can degrade long before anything looks old, and creosote can glaze inside a flue that’s only been lightly used. A young chimney is not a self-inspecting one. Call (866) 596-7310 for an exact quote; estimates are free.
Typically decades-old soot, animal nesting, a rusted damper that no longer moves, and clay tile with joints that have cracked or crumbled over time. The firebox may look untouched, but the flue has been collecting whatever came down it since the house was converted. Nothing gets recommended until we’ve run a camera and shown you the footage. Call (866) 596-7310 to book the visit.
The degree of creosote tells you. First and second degree is brushable and routine. Third-degree creosote is glazed, hardened, and a genuine fire hazard that no brush will remove. You can’t tell which you have by looking up from the firebox, which is why the inspection comes first and why you get photos of what we found. Call (866) 596-7310 for an exact quote; estimates are free.
Because of the freeze-thaw swings. Water gets into a hairline crack in the crown, freezes, expands, and opens the crack wider, and the cycle repeats through every cold snap. Mortar joints on exterior masonry chimneys take the same beating. It’s the local climate doing the work, not bad construction.
In most cases, yes. We work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, so if your chimney carries one of those brands, matching components are available. We identify what’s installed first rather than guessing, then order the correct manufacturer-specific part. Call (866) 596-7310 and we’ll confirm what’s on your chimney.
Ready to get your Mehlville chimney looked at by someone who checks before recommending? Call (866) 596-7310 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. One call covers the sweep, the inspection, and any repair, and you’ll see the camera evidence before anything gets approved.
Written by the team at Hawk Chimney Sweep.