Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Kirkwood
If you burn wood in a Kirkwood home, the chimney needs more than a quick brush. Hawk Chimney Sweep handles chimney sweeping for Kirkwood homeowners who live in older masonry houses where flues, crowns, and liners have taken decades of hard use. We work the neighborhoods you know – the historic downtown blocks, the brick streets off Kirkwood Road, the side streets where attached homes back up on each other – and we treat each flue as its own system. You get a real inspection, a clean sweep, and straight answers. Call (866) 596-7310 to book a sweep or ask a question.
Why Kirkwood Homeowners Call Hawk Chimney Sweep for Chimney Sweep
Kirkwood isn’t a subdivision of new construction, and the chimney work here reflects that. Many calls we get from Kirkwood come from people whose chimneys have never been properly inspected, only brushed. That’s where the Hawk-eyed inspection standard matters: we check the full flue from cap to firebox before and after cleaning, not just the firebox floor. We work with a defined portfolio of professional-grade products – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – because a repair on a Kirkwood chimney should outlast the next freeze-thaw cycle, not just make it through the winter. Our technicians have up to 12 years of experience, and they know the difference between a flue that needs cleaning and one that needs relining. One company handles the sweep, the inspection, and any repair, so there’s no handoff and no one else to call when something turns up. If you’re in Kirkwood and want a sweep that also tells you what’s actually happening in your chimney, we’re the call. Call (866) 596-7310.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Sweep Services in Kirkwood
Chimney Sweep Services in Kirkwood start with a real look at the flue, not a brush straight down the stack. On a typical sweep, we brush the flue, remove creosote and soot from the firebox and smoke chamber, check the damper and cap, and clear any blockages. When you need it: if it’s been a season since the last cleaning, if you smell smoke in the room, or if you’re buying a Kirkwood home and don’t know the chimney’s history. A typical annual sweep in Kirkwood runs $180 – $320, and a Level 1 inspection usually adds $100 – $150.
What a Full Sweep Involves
We set drop cloths, brush the flue from the top or bottom, vacuum the firebox with a HEPA unit, and remove all debris. The smoke chamber and shelf get hand-scrubbed where creosote has glazed. You see the results, not just a bill.

When a Sweep Turns Into a Diagnostic
On older Kirkwood masonry homes, a sweep often reveals cracked clay tile or a crumbling crown before the brush finishes. When that happens, we stop and show you what we found instead of finishing the job and leaving you with a problem.

Chimney Cleaning in Kirkwood
Chimney Cleaning in Kirkwood homes means going after what accumulates between burns: creosote, soot, and the fine ash that settles into the smoke chamber. We clean the firebox, damper, smoke shelf, and flue, then vacuum the whole assembly so nothing drifts back into your living room. Yearly cleaning is the baseline if you burn firewood, and it’s especially important in Kirkwood’s humid summers, which speed up creosote degradation. A typical fireplace cleaning runs $150 – $280, with creosote removal to bare tile priced per flue and confirmed in the written estimate.
Creosote and Soot
First-degree creosote brushes off easily. Third-degree creosote is glazed, hard, and needs more than a brush – it’s a fire hazard and a sign the flue needs attention before the next burn season. We remove as much as the flue allows and tell you plainly what’s left.
Shared Stacks and Separated Flues
Kirkwood’s century-old attached properties often share a chimney stack, and that’s a cleaning job with extra steps. We smoke-test each flue to confirm it serves only its own appliance; if a neighbor’s vent ties into your stack, cross-contamination is a genuine risk and worth knowing before you light a fire.
Trusted Brands We Service in Kirkwood
When a Kirkwood chimney needs a liner or a resurfaced flue, we work with the products that hold up in this climate. DuraFlex flexible liners go into full relining jobs. HeatShield resurfacing restores a cracked clay tile flue from the inside, a repair most sweep-only companies can’t offer. Gelco, Olympia Chimney, and Famco round out the professional-grade portfolio for caps, dampers, and venting components. We don’t stock parts and we don’t run a warehouse; what we do is specify the right product for the job, order it, and install it correctly. Turnaround on most Kirkwood relining work is a matter of days, not weeks. Call (866) 596-7310 for a free estimate on any of these products.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Kirkwood Homes
- Shared stacks with unverified separation. Two attached homes often share one chimney masonry structure, and each flue must be smoke-tested to confirm it serves a single appliance. Skipping that test is how you get a neighbor’s smoke in your living room.
- Cracked clay tile behind first-degree creosote. A sweep that stops at the brush misses tile damage hidden under a light creosote film. A Level 2 inspection with a camera finds it before it becomes a structural problem.
- Crumbling mortar crowns and spalling face brick. Freeze-thaw cycles eat the crown from the top down, and once water gets in, the liner degrades from the outside in. We look at the exterior stack, not just the flue.
- Original unlined rubble chimneys. Many 1910s-1940s Kirkwood homes still have unlined chimneys that weren’t built for modern appliance temperatures. These need relining with DuraFlex or HeatShield rather than another sweep-and-go.
Pricing for Chimney Sweep in Kirkwood, MO
Prices in Kirkwood reflect the housing stock and the extra diagnostic work it requires. A standard sweep runs $180 – $320. A Level 1 inspection adds $100 – $150, and a Level 2 inspection with camera runs $250 – $450. Creosote removal to bare tile is quoted per flue. HeatShield resurfacing typically runs $1,800 – $3,200, and a full DuraFlex relining falls in the $2,500 – $5,000 range depending on flue length and access. What pushes a job higher: shared stacks that need smoke-testing each flue, roof access on tight lots, and exterior brick work on aging crowns. Everything is confirmed in the written estimate before we start. Call (866) 596-7310 for a free estimate.
We Also Serve Cities Near Kirkwood
We work all over the Kirkwood area, including Town and Country, Crestwood, Webster Groves, and Creve Coeur. If you’re nearby and your chimney has the same age and wear you’d expect from this part of the metro, we can help. Book a sweep or a camera inspection by calling (866) 596-7310.
Serving Kirkwood, MO – Our Local Coverage Area
We serve Kirkwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Kirkwood
You can’t tell from inside your own firebox – it takes a smoke test on each flue to confirm separation. On Kirkwood’s older attached properties, a shared masonry stack often looks fine from the living room but has connected flues behind the brick. We run the test during a sweep and tell you what we find. Call (866) 596-7310 for an exact quote – estimates are free.
Yes. A crumbling crown lets water into the flue from the top, and that water degrades the liner over time. We check the crown and exterior stack during a sweep, and if it needs repair, that gets quoted alongside the cleaning. Call (866) 596-7310 for an exact quote – estimates are free.
It’s more common than you’d expect, mostly in chimneys that went several seasons without a proper sweep. The humid Kirkwood summers accelerate the glazing process once creosote has formed. It needs more than a brush and is best handled before burn season starts. Call (866) 596-7310 for an exact quote – estimates are free.
We use DuraFlex for flexible liner installations and HeatShield for resurfacing cracked clay tiles from the inside. Both are professional-grade products built for the freeze-thaw stress Kirkwood chimneys see. Gelco, Olympia Chimney, and Famco cover other venting and component needs. Call (866) 596-7310 for an exact quote – estimates are free.
Once a year, and ideally before your first fire of the season. Kirkwood’s older masonry chimneys accumulate creosote quickly, and a yearly Level 1 inspection catches tile cracks before they turn into a relining job. If the chimney hasn’t been inspected in years, start with a Level 2. Call (866) 596-7310 for an exact quote – estimates are free.
Call (866) 596-7310 for a free estimate on any chimney sweep, inspection, or repair in Kirkwood. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Hawk Chimney Sweep.