Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Ferguson
If your fireplace smokes into the room, your damper won’t shut, or the brick above your roofline is spalling, the cause usually traces back to the flue and the masonry around it. We work on chimneys throughout Ferguson, and we know what post-war ranch and split-level construction here typically hides. Our technicians have up to 12 years of experience, and every repair starts with a top-to-bottom look at the whole system rather than a guess. Call (866) 596-7310. We answer 24/7. Fast dispatch, 7am-7pm.
Why Ferguson Homeowners Call Hawk Chimney Sweep for Chimney Repair
Ferguson isn’t a market for modern stainless liners and fresh gas inserts. Much of the housing stock here is mid-century, and the chimneys are original. That means the repair decisions are different: preserving and safely maintaining brick chimneys that are now more than 60 years old, not swapping them out. Our Hawk-eyed inspection looks at the full flue system from cap to firebox, so we can tell you what’s actually failing and what’s still sound.
We’re a full-service chimney specialist, which matters when a repair follows an inspection. The same company that sweeps your flue, inspects it, and repairs it stays accountable for the result. No handoff to a separate masonry contractor and no gap where nobody owns the problem. When a liner is cracked after decades of freeze-thaw cycles, we can resurface it with HeatShield rather than defaulting to a full reline, and we install DuraFlex flexible liner systems when a reline is the right call.
We work across Ferguson, including the older blocks near the 63135 core where clay tile flues have taken the most wear, and out along Florissant Road where the ranch homes carry their own set of chimney quirks. Neighbors in Jennings, Florissant, and Overland call us for the same reasons. Licensed and insured, with a written estimate that sets the price before any work begins.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Repair Companies in Ferguson
Chimney Repair Companies in Ferguson get called for a specific set of failures: a smoking firebox, a damper that won’t seal, cracked clay tile liners, and crowns that have opened up through freeze-thaw. The job usually means diagnosing the flue, then repairing or relining it and resealing the damper and crown. Typical chimney repair in Ferguson runs from about $250 to $600 for targeted fixes like a damper reseal and crown repair, and $2,500 to $5,500 or more for a full reline, depending on flue length and access. Estimates are free, and the written estimate is what you pay.
What a Repair Visit Involves
A repair visit starts with inspection, not with a brush. We run a camera through the flue and document what we find so you can see it yourself. From there, the scope is set by evidence, and anything that can safely wait gets told to you straight.
When to Book Before the Heating Season
Late winter and early spring are when Ferguson crowns and flue tiles crack. Booking a repair before fall means the work is done well ahead of heavy fireplace use. It also means you’re not discovering a cracked liner the first cold week you need the fireplace.
Chimney Masonry Repair in Ferguson
Chimney Masonry Repair in Ferguson is mostly about water and age: spalling brick on mid-century single-wythe exteriors, mortar joints that have eroded through decades of humid summers and hard winters, and crowns that crack and let moisture into the flue. Repointing, tuckpointing, spalling brick replacement, and waterproofing address those failures at the source. Typical masonry repair in Ferguson runs $400 to $1,200 for repointing and tuckpointing on a standard chimney, $800 to $2,500 for spalling brick repair, and $1,500 to $4,000 for a partial rebuild. A free estimate pins the number down.
Repointing and Tuckpointing
Tuckpointing replaces the failed mortar between bricks without disturbing the brick itself. It’s the right move when the joints are recessed and the brick faces are still intact. Repointing done early keeps a small mortar repair from becoming a rebuild.
Crown and Flashing Waterproofing
The crown and the flashing are where most Ferguson water damage starts. A cracked crown lets water into the flue, and failed flashing lets it into the roof deck. Resealing both, then waterproofing the masonry, closes those paths before the next freeze-thaw cycle.
Trusted Brands We Service in Ferguson
We install and work with professional-grade chimney products, not generic substitutes from a big-box shelf. That portfolio includes DuraFlex flexible liner systems for relining, HeatShield for resurfacing cracked flue liners, Gelco, Olympia Chimney, Famco, and Copperfield. We don’t stock parts; each repair is scoped to your chimney and the materials are specified for the job. Because we handle the sweep, the inspection, and the repair under one roof, there’s no waiting on a third party to source a component or hand off the work. Turnaround on common Ferguson repairs is straightforward once the estimate is approved.
Common Chimney Repair Problems We See in Ferguson Homes
- Cracked original clay tile liners. Flues in 1950s and 1960s ranch homes are at or past their expected service life, and freeze-thaw cycles open cracks that let creosote and moisture reach the masonry behind them.
- Glazed creosote on cool upper flue sections. Short, straight flue runs make blockages easy to spot from the firebox, but hard, glazed creosote builds fast higher up and needs hand-scraping rather than a quick rotary pass.
- Corbeled smoke chambers in soft post-war brick. Careless rotary sweeping chips the 1950s brick and leaves glazed creosote behind. The repair is careful hand work, not a spinning brush.
- Unsealed dampers and failed crowns or flashing. Humid summer air and freeze-thaw water get into the flue through gaps that were never properly sealed, rusting dampers and degrading masonry from the inside.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Ferguson, MO
Pricing here is per job, set by the written estimate. Targeted repairs like a damper reseal, a crown repair, or minor flashing work typically run $250 to $600. Repointing and tuckpointing on a standard chimney run $400 to $1,200, spalling brick repair $800 to $2,500, and a partial rebuild $1,500 to $4,000. A HeatShield resurfacing or a DuraFlex reline sits higher, roughly $2,500 to $5,500 or more depending on flue length and access. What moves the number is how much of the flue is affected, whether the crown and flashing need work, and how much hand-scraping the smoke chamber takes. The estimate is free, and nothing is recommended without camera evidence you can see yourself.
We Also Serve Cities Near Ferguson
We work on chimneys in the towns around Ferguson as well. Homeowners in Jennings, Florissant, Overland, and Bellefontaine Neighbors call us for the same repairs, and the housing stock is similar enough that the diagnosis often looks familiar. If you’re outside Ferguson but nearby, our Ferguson service coverage carries over to you. One call, complete chimney care, regardless of which side of the line you’re on.
Serving Ferguson, MO – Our Local Coverage Area
We serve Ferguson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Ferguson
Burn dry, seasoned wood and keep the fire hot enough to limit smoke, and avoid smoldering overnight burns that load the flue with creosote. In Ferguson’s short, straight ranch flues, glazed creosote builds fast on the cool upper sections, so a shorter sweeping interval matters if the stove is a primary heat source. Don’t burn wet wood or trash. Call (866) 596-7310 for an inspection and a clear read on your buildup. Estimates are free.
We dispatch across Ferguson from 7am to 7pm, Sunday through Friday, and many repairs can be booked same-day. We answer 24/7, and a call outside dispatch hours is booked into the next opening. Call (866) 596-7310 for an exact quote.
Yes. We work throughout Ferguson, including the older blocks near the 63135 core and out along Florissant Road. Neighborhood doesn’t change the estimate; the chimney does. Call (866) 596-7310 to book an inspection.
Often, yes. Straightforward repairs like a damper reseal or crown repair can usually be done same-day once the estimate is approved. Larger work like a reline or rebuild gets scheduled. Call (866) 596-7310 and we’ll tell you what’s realistic for your chimney.
It runs close to Jennings, Florissant, and Overland, since the housing stock and climate are much the same. The number that matters is the written estimate for your job, and it’s free. Call (866) 596-7310 for yours.
Get a Free Chimney Repair Estimate in Ferguson
If your fireplace is smoking, your damper won’t seal, or the brick above the roofline is spalling, call us and we’ll take a look from cap to firebox. Call (866) 596-7310 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Licensed and insured, and a full-service chimney specialist ready to handle the sweep, the inspection, and the repair in one place. You can also read more about chimney repair and what a typical visit involves.
Written by the team at Hawk Chimney Sweep.