Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Kirkwood, MO
Chimney inspection in Kirkwood is where our work usually starts, and it’s rarely a quick glance up a flue. This is a city of century-old masonry homes, and the chimneys that come with them have been through decades of Midwest heating cycles and freeze-thaw. We look at the whole system, cap to firebox, and tell you plainly what’s sound, what’s wearing, and what can safely wait. Call (866) 596-7310 to book an inspection.
Why Kirkwood Homes Are Different
Kirkwood’s housing stock is dominated by early-20th-century masonry construction: brick Tudors, Colonial Revivals, and four-squares from the 1910s through the 1940s. That age bracket is the single biggest factor in how chimney work goes here. Many of these homes still have their original clay tile liners, some have unlined rubble chimneys, and plenty have exterior brick stacks that show real spalling after a century of weather.
The climate compounds it. Kirkwood sits in the humid continental St. Louis metro, where freeze-thaw cycles repeatedly stress brick and mortar from the outside while humid summers accelerate creosote degradation on the inside. Chimney exteriors and liners simply wear faster here than they would in a milder climate.
Around the historic downtown district, we routinely find exterior stacks with crumbling mortar crowns and spalling face brick. Repairs like that are uncommon in the newer suburbs nearby, which is why a Kirkwood chimney job so often includes masonry work rather than a cleaning alone. The houses set the scope.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Kirkwood Services
Two services account for most of what Kirkwood homeowners call us about: keeping the flue clean and getting the structure sound again when age has caught up with it.
Chimney Sweep in Kirkwood
A sweep here means more than running a brush. On a Kirkwood home from the 1920s or 1930s, the flue is likely original clay tile, and creosote sitting on a worn, glazed surface behaves differently than it does in a newer liner. We clean cap to firebox, then look at what the cleaning exposed. Humid St. Louis summers are hard on creosote, and glaze that builds over a season doesn’t always come off with a standard pass. Book a Chimney Sweep in Kirkwood before the burning season starts and you’ll know where you stand well before the first cold night.

Chimney Repair in Kirkwood
Repair is where this city’s housing stock keeps us busy. Spalling face brick, crumbling mortar crowns, cracked liners, and failed flashings show up constantly on the older masonry stacks near the historic district. Freeze-thaw is usually the culprit, working mortar joints open over many seasons until water gets behind the brick. We handle masonry repair, crown rebuilds, and liner work with professional-grade materials, including HeatShield resurfacing for cracked tile and DuraFlex flexible liner systems when a flue needs full relining. For structural work, see Chimney Repair in Kirkwood.

Chimney Inspection in Kirkwood
Chimney Inspection is the service Kirkwood homeowners ask for most, and the housing era explains why. On the 1910s-to-1940s masonry homes around the historic downtown district, we routinely find original clay tile liners degraded by decades of heating cycles plus St. Louis-area freeze-thaw. That combination makes relining and masonry repair the core of the work here rather than simple sweep-and-go, and an inspection is how we find out which case you’re in. Every Chimney Inspection we perform is a methodical, top-to-bottom assessment of the full flue system, not a quick pass before the brush goes in.
Fireplace Inspection
An inspection of the firebox and the firebox-to-flue transition. On Kirkwood homes of this age, damaged firebox brick and missing mortar joints are common finds, and they change what’s safe to burn.
Signs you need it
You’re seeing cracked or crumbling brick inside the firebox, a smoky draft that didn’t used to be there, or it’s simply been several seasons since anyone looked.
What it costs in Kirkwood
A fireplace-level inspection typically runs $99 to $250 as part of a standard visit, with the written estimate setting the final price.
How we do it
We check the firebox brick and mortar, the damper, the smoke chamber, and the transition into the flue, then document what we find with photos.
Level 2 Chimney Inspection
A Level 2 inspection goes beyond the visual pass into the flue itself. This is the right call after a chimney fire, when you’ve changed appliances, or when the home has changed hands. On century-old Kirkwood chimneys with unlined rubble sections or old tile, it’s often the only way to see the liner’s true condition.
Signs you need it
You’ve had a chimney fire, you’re switching to a new stove or insert, or you’ve bought a house with a chimney of unknown history.
What it costs in Kirkwood
A Level 2 inspection typically falls between $250 and $450 in Kirkwood, with the final figure confirmed in the written estimate before we book.
How we do it
We run a camera down the flue, inspect accessible portions of the chimney interior and exterior, and record the full condition with photo documentation.
What Chimney Inspection Costs in Kirkwood
These are typical ranges, not quotes. The age and condition of the chimney decide where you land, and the written estimate sets the final price.
| Item | Typical range in Kirkwood |
|---|---|
| Fireplace-level inspection | $99 – $250 |
| Level 2 inspection with camera | $250 – $450 |
| Sweep and inspection combined visit | $150 – $350 |
Do I really need a camera inspection on an older Kirkwood chimney?
Yes, if the liner is original or its history is unknown. Camera inspection is the only way to see cracked tile or gaps behind the flue wall without opening the chimney, and you get the photos to review yourself.
How often should a Kirkwood chimney be inspected?
Once a year is the standard, and older masonry homes here benefit from keeping to it. Creosote and mortar both degrade faster in a humid freeze-thaw climate, so annual eyes on the flue catch problems earlier. Call (866) 596-7310 to book – estimates are free.
Brands We Service in Kirkwood
We install and work with professional-grade chimney products, including DuraFlex flexible liner systems, HeatShield resurfacing materials, Gelco, and Olympia Chimney components. These are the brands built for the repair work older Kirkwood chimneys actually need, not big-box substitutes. Turnaround depends on the repair – small pieces move quickly, fabricated liners take longer. See our brands for the full picture.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Kirkwood, MO
| Service | Typical range in Kirkwood |
|---|---|
| Standard chimney sweep and inspection visit | $150 – $350 |
| Fireplace-level inspection | $99 – $250 |
| Level 2 inspection with camera | $250 – $450 |
| Crown repair or rebuild | $300 – $1,200 |
| HeatShield flue resurfacing | $1,200 – $3,500 |
| DuraFlex liner installation | $2,500 – $6,500 |
| Masonry repointing and spalled brick repair | $500 – $2,500 |
| Chimney cap replacement | $200 – $600 |
Two things push price up in Kirkwood: height and access on tall exterior stacks, and the extent of liner or masonry damage that decades of freeze-thaw have left behind. You get an upfront price from the written estimate before any work is booked, and nothing gets recommended that the camera evidence doesn’t show you.
Neighborhoods We Serve in Kirkwood
We work across Kirkwood, from the historic downtown district out toward the edges of town. The older masonry homes near downtown see the most structural repair work, while the neighborhoods to the south and west tend toward standard sweep and inspection visits. Response timing depends on the season, and the weeks before burning season fill first.
- Downtown Kirkwood historic district
- Around Kirkwood Park
- The neighborhoods near North Kirkwood
- South Kirkwood
- West Kirkwood
Service Area – Cities Near Kirkwood
Kirkwood sits in the heart of the St. Louis metro, and we cover the surrounding communities too. If you’re just outside our Kirkwood coverage, check the city page for your area: Town and Country, MO, Crestwood, MO, Webster Groves, MO, and Creve Coeur, MO. Each one has its own housing stock and its own set of common chimney issues.
Serving Kirkwood, MO – Our Local Coverage Area
We serve Kirkwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Kirkwood
Yes, we cover Kirkwood from the historic downtown district to the city’s edges. Scheduling depends on the season, so book early if you want your inspection done before burning season starts.
Structural masonry work and relining often require a permit in St. Louis-area municipalities, so check with Kirkwood’s building department before work begins. We’ll tell you what the job involves so you know what to ask about.
We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed Saturday.
If your Kirkwood chimney hasn’t been looked at in a while, or the masonry around the stack is telling you something, we’ll give you a straight answer and a written estimate. Our technicians have up to 12 years of experience. Call (866) 596-7310 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Kirkwood Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Nathan Schaefer"Work is good and the price was fair. The scheduling was a little loose, the window they gave me was pretty wide and he showed up at the back end of it. Once he was here he was quick and knew what he was doing."
- Jodi Quinn"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Danielle Hayes