Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Ferguson, MO
Chimney inspection in Ferguson, MO starts with one reality: most of the chimneys here are original equipment. The ranches and split-levels built from the late 1940s through the 1960s came with clay tile flues that have now been through decades of Midwest freeze-thaw cycles, and a proper look inside tells you whether that flue is still doing its job. We handle sweep, inspection, and repair as one company, so nothing found in the flue gets handed off to someone else. Call (866) 596-7310.
Why Ferguson Homes Are Different
Ferguson sits in the humid continental transition zone, which is a polite way of saying the chimneys here take a beating from both directions. Cold winters mean heavy fireplace use and steady creosote buildup. Hot, humid summers let that creosote degrade and let damp flues rust from the inside. Then late-winter freeze-thaw works on the exterior masonry, cracking crowns and flue tiles that looked fine in the fall.
The housing stock shapes the work just as much. Post-WWII ranches, split-levels, and small bungalows dominate, many with single-wythe brick exteriors and interior masonry fireplaces. Those flues are short and straight, which makes a serious blockage easy to spot but creosote glazing stubborn to remove. In the older blocks near the 63135 core, liners have often cracked after decades of those same freeze-thaw cycles. Up on the ranch homes off Florissant Road, we regularly find original dampers that were never properly sealed and heavily corbeled smoke chambers, both of which call for careful hand-scraping rather than a rotary sweep that can chew up soft 1950s brick.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Ferguson Services
Two jobs come up most often when Ferguson homeowners call us: routine cleaning and the repairs that turn up once a chimney gets looked at properly.
Chimney Sweep in Ferguson
A sweep here is rarely just a brush down the flue. The short, straight runs in Ferguson’s ranch homes collect soot in predictable places, and creosote glazing on 1950s clay tile needs hand work before any rotary tool touches it. We set up containment so nothing drifts into the room, then clean from the firebox up through the smoke chamber and flue. If we find a cracked tile or an unsealed damper along the way, you hear about it before we leave rather than after the next burn season. Book a chimney sweep when the flue hasn’t been opened in a year or more.
Chimney Repair in Ferguson
Repair is where the original construction in Ferguson really shows. Soft brick from the 1950s doesn’t take modern mortar the same way newer masonry does, and a corbeled smoke chamber needs to be rebuilt to its original shape, not smoothed over. We work with HeatShield for resurfacing cracked and spalling flue liners, which keeps a sound chimney in service instead of pushing straight to relining. Crown cracks, damper problems, and loose brick all get addressed as one job. See what chimney repair covers before the next cold snap.
Chimney Inspection in Ferguson
Chimney inspection in Ferguson is mostly an exercise in reading 1950s construction. The clay tile flues in the city’s post-WWII ranches and bungalows are now at or past their expected service life, and the freeze-thaw cycles that arrive every late winter crack tiles and crowns that held up fine through the summer. Short flue runs mean problems are visible if someone actually looks, which is the whole point of our chimney inspection.
Fireplace Inspection
Signs you need it
You need a fireplace inspection when smoke rolls into the room instead of up the flue, when the damper no longer seats, or when the firebox brick shows cracks or crumbling mortar.
What it costs in Ferguson
A fireplace inspection in Ferguson typically runs $99 to $250, depending on how much of the firebox and smoke chamber needs close examination.
How we do it
We check the firebox brick and mortar joints, test the damper through its full travel, inspect the smoke chamber for the heavy corbeling common in Ferguson ranches, and photograph anything that needs attention.
Level 2 Chimney Inspection
Signs you need it
A Level 2 inspection is the right call after a chimney fire, before buying a Ferguson home, or any time you switch fuel types or appliance.
What it costs in Ferguson
Expect roughly $150 to $400 for a Level 2 inspection in Ferguson, with video scanning of the full flue included.
How we do it
We run a camera the length of the flue, record every tile joint and offset, check the exterior masonry and crown, and give you the footage so you can see the condition for yourself.
What Chimney Inspection Costs in Ferguson
| Item | Typical range in Ferguson |
|---|---|
| Fireplace inspection | $99 – $250 |
| Level 2 chimney inspection with video scan | $150 – $400 |
| Chimney flue inspection as part of a sweep | $99 – $250 |
Can a chimney inspection find a problem a sweep would miss?
Yes. A sweep clears what’s blocking the flue; an inspection finds cracked tiles, failed joints, and corbeled smoke chambers that a brush passes right by. In Ferguson’s older flues, those are the issues that matter.
How often should a Ferguson chimney be inspected?
Once a year is the standard, and spring is a sensible time here because freeze-thaw damage from late winter shows up clearly. Call (866) 596-7310 for an exact quote on your inspection – estimates are free.
Brands We Service in Ferguson
We install and work with professional-grade chimney products, including HeatShield, Gelco, Olympia Chimney, and Famco. None of it is big-box substitute material. Because we’re connecting you with independent local professionals rather than running a warehouse, parts are ordered for your specific job – so expect a short lead time between approval and install. You can see the full range on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Ferguson, MO
| Service | Typical range in Ferguson |
|---|---|
| Fireplace inspection | $99 – $250 |
| Level 2 chimney inspection with video scan | $150 – $400 |
| Chimney flue inspection | $99 – $250 |
| Standard chimney sweep | $129 – $299 |
| Sweep with heavy creosote glazing removal | $199 – $399 |
| Crown repair or rebuild | $300 – $800 |
| Flue tile repair | $250 – $700 |
| HeatShield flue resurfacing | $1,200 – $2,800 |
| DuraFlex liner installation | $2,500 – $5,500 |
| Damper replacement | $250 – $600 |
Two things push price up on a Ferguson chimney: the condition of the original clay tile, and how much hand work the smoke chamber needs. Heavily corbeled chambers in 1950s ranches take longer than a straight flue, and glazed creosote on soft brick can’t be rushed. Whatever the scope, the price is set per job by a written estimate before any work starts, and the estimate itself is free.
Neighborhoods We Serve in Ferguson
We connect homeowners across Ferguson with independent local chimney professionals, and the work looks different block to block. Near the 63135 core, the older homes and their original masonry fireplaces get the most inspection attention. Out toward the ranch streets off Florissant Road, the issues tend to be unsealed dampers and corbeled smoke chambers. Same city, different work.
- Downtown Ferguson and the 63135 core
- Ranch homes off Florissant Road
- Split-level blocks north of downtown
- Bungalow streets on Ferguson’s east side
Response across Ferguson is generally quick, and when it isn’t we tell you up front rather than leave you guessing. Call (866) 596-7310. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Service Area – Cities Near Ferguson
Ferguson sits in a stretch of north St. Louis County where the same post-WWII housing stock repeats from town to town, so the chimneys nearby often have the same stories. We also connect homeowners in Jennings, MO, Florissant, MO, Overland, MO, and Bellefontaine Neighbors, MO with local chimney professionals. If your home is just outside Ferguson’s city limits, we can still help – just mention your cross streets when you call.
Serving Ferguson, MO – Our Local Coverage Area
We serve Ferguson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Ferguson
Usually fast, and always confirmed with you first. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, covers most Ferguson requests. We’re closed Saturday, so a call then is booked into the next opening. Call (866) 596-7310.
Cleaning and inspection generally don’t require one. Structural work like a full reline or masonry rebuild may, depending on the scope. Ask the City of Ferguson’s building department before scheduling anything structural, and we’ll tell you what our written scope covers.
It means the sweep and the inspection happen together. On a 1950s brick chimney, cleaning a flue without confirming the tiles are sound only hides the problem. We clean, inspect with video where needed, and show you the footage before recommending any repair.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Ferguson Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Nathan Schaefer"Work is good and the price was fair. The scheduling was a little loose, the window they gave me was pretty wide and he showed up at the back end of it. Once he was here he was quick and knew what he was doing."
- Jodi Quinn"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Danielle Hayes