Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Concord, MO
We provide independent DuraFlex service across Concord, MO, from routine cleaning to Level 2 inspection, cap installation, and waterproofing. The one thing that makes our DuraFlex work here different: most of the liners we see in Concord are in masonry fireplaces that haven’t burned wood in years, converted to gas logs and left uncapped, so the real enemy isn’t heavy creosote – it’s water and whatever moved in when nobody was looking.

DuraFlex makes flexible stainless steel chimney liners, and working with them regularly means we know how these liners are sized, insulated, and terminated inside the specific flue layouts Concord’s brick ranches were built with. We’re an independent shop, not affiliated with or authorized by DuraFlex, and we’re equipped to sweep, inspect, and repair the whole system from cap to firebox. Call (866) 596-7310 to book an inspection.
Why Concord Residents Choose Us for DuraFlex Service
DuraFlex liners show up constantly in Concord, and knowing these products means knowing their failure points. An insulated liner wrap that tears at the top termination. A connector joint that loosens through freeze-thaw cycles. Lower-grade stainless that pits where acidic condensate sits behind a vented gas log set. We look for all of it during a Hawk-eyed inspection of the full flue system, not a quick brush-and-go.
We use quality parts that fit DuraFlex equipment, from the brand’s own liner components and termination kits to well-made aftermarket caps and top plates where DuraFlex doesn’t make the part. No generic substitutes pressed into a job they weren’t designed for.
Our technicians have up to 12 years of experience with masonry flues and flexible liners, and scheduling is straightforward: tell us what you have, we’ll confirm what the visit needs to cover, and you’ll get a flat price for the sweep agreed before we book. Serving Concord means treating each chimney as its own system, because in this housing stock, no two are set up the same way.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Concord
These are the DuraFlex issues that come up most often in Concord’s mid-century homes:
- Degraded insulation wrap at the top termination. When a Concord chimney cap is missing, rain and snowmelt run straight down the flue onto the liner’s insulated wrap, which can tear or break down over time. The liner itself may be fine while the insulation around it no longer does its job.
- Loosened top-plate and connector joints. The warm-to-cold swing in Concord’s humid continental winters works on stainless steel and its fasteners, and liner-to-top-plate or liner-to-appliance joints slowly back out. That’s a hidden draft and water path, not something you’ll notice from the firebox.
- Corrosion pitting behind vented gas logs. Acidic flue condensate from a gas appliance sits against lower-grade flexible liner metal and pits it. Many Concord fireplaces converted to gas logs years ago are running on a liner nobody has scoped since the conversion.
- Liners that no longer match the appliance. A DuraFlex liner sized for wood and later paired with a gas insert or vent-free log set leaves the home with a venting setup that doesn’t line up with what’s actually burning. We check the match during inspection and tell you plainly whether it’s still right.
- Nesting material and blockages in uncapped flues. Raccoons and chimney swifts move into open flues across Concord’s older subdivisions, and a nest or debris load changes what a routine sweep needs to address. We scope the flue before the brush goes anywhere near it.
DuraFlex Service in Concord: What Local Conditions Mean for Your Equipment
Most of the Concord subdivisions in 63128 were built out before chimney caps were standard practice, and that single fact drives more of our DuraFlex work here than creosote does. A large share of the DuraFlex liners in these brick ranches are topped with open flues or improvised covers. So when a homeowner calls for what should be a routine sweep, the inspection often turns up something else: raccoon or chimney-swift nesting that arrived over the summer, or rain that’s been running the full length of the flue into the top plate and the liner’s termination.
That matters for DuraFlex owners specifically because the top termination is where these liners are most exposed. The liner below the roofline can be perfectly sound while the connection at the top has been wet for years. We scope first, confirm whether the stainless has held up or pitted, and only then decide between resealing the top plate, fitting a proper cap, or recommending liner work. In a typical Concord brick ranch, a homeowner who converted to vented gas logs years ago learns on inspection that the top plate was never sealed and the cap is gone. A qualified local pro scopes the liner, checks the stainless for pitting at the condensate line, then reseals or replaces the top plate, fits a cap, and cleans the firebox and flue path for the gas appliance.
DuraFlex Models & Products We Service in Concord
We service the DuraFlex flexible liners found in Concord homes, including the round single-wall SS Flexible Chimney Liner, the Insulated Flexible Liner Kit, the Oval Flexible Liner for tight masonry flues, and the Pro Flexible Liner with 316L stainless. Each has its own sizing and termination considerations, and we handle cleaning, inspection, and repair for all of them.

For parts, we use DuraFlex’s own listed liner components and termination kits so sizing and warranty integrity stay intact. Where DuraFlex doesn’t make the piece – caps, top plates, connectors – we fit quality aftermarket parts that match the liner. We don’t stock or order OEM parts, and we’re independent of the manufacturer. What we can tell you is whether the liner you have is sound, and what it needs to stay that way.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Concord
Pricing for DuraFlex cleaning and inspection in Concord is set per job by a written estimate, and the estimate is free. A routine sweep with a camera inspection and photo report is quoted once we know the flue’s condition and access; liner-related work is quoted after the scope, because a resealed top plate and a full relining are very different jobs. We tell you plainly when work can safely wait and when it can’t. Call (866) 596-7310 for an exact quote – estimates are free.
Serving Concord, MO – Our Local Coverage Area
We serve Concord and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Concord
Yes. A gas appliance still produces flue condensate and can leave debris, and an annual inspection catches top-plate and termination problems before they reach the liner. Call (866) 596-7310 to book yours.
Usually a missing or failed cap and an unsealed top plate let rain run the length of the flue. We scope the liner to check the stainless, then reseal or replace the plate and fit a proper cap. Call (866) 596-7310 for an estimate.
Often yes, and the oval profile exists for exactly the tight masonry flues these homes have. Whether relining or spot repair is the honest answer depends on how much of the clay has spalled. A Level 2 inspection answers that with camera evidence you can see yourself.
Not until the flue is cleared and inspected; a nest or debris load is a real blockage risk. We remove nesting material during the sweep and scope the flue afterward. Call (866) 596-7310 to get it checked before burning season.
A Level 2 is the right call when the appliance or liner has changed, or when there’s water, nesting, or a suspected liner problem – which covers most of the older Concord homes we see. A Level 1 fits a routine sweep on a system already known to be sound. Call (866) 596-7310 and we’ll confirm which your Concord chimney needs.
Service Areas Near Concord
We book DuraFlex service throughout Concord and the surrounding south-county area, including St. Louis, Clayton, University City, Webster Groves, and Jennings, plus Crestwood and Lemay. If you’re just outside Concord, tell us your cross streets and we’ll confirm coverage. Our full DuraFlex service details cover liner work beyond routine cleaning.
Book Your DuraFlex Service in Concord Today
If your Concord chimney has a DuraFlex liner, an uncapped flue, or gas logs you’ve never had scoped, book a sweep and inspection and find out where things actually stand. Estimates are free, and nothing is recommended without camera evidence you can see for yourself. Call (866) 596-7310. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Hawk Chimney Sweep.